[font=Arial][size=6]
Hi, i am a new member and need help for ternary logic code in PSpice simulation code.
I have related circuit digrams with me ,i need help for its simulation and for layout edition using MICROWIND layout editor.
I tried it but didn't succeed.Following is tried code for Positive Ternary Inveter Code:


*positive ternary inverter

VDD 1 0 DC 1.2V
V+1V 6 0 PULSE(0 1 .98N .03N.03N .97N 2N)
V-1V 7 0 PULSE(0 1 1.97N .03N.03N 1.97N 4N)
VVin 8 0 PULSE(-1 1 .23N .03N.03N .23N .5N)
MN1 4 8 7 0 N1 W=30U L=.36U
MP1 5 7 4 3 P1 W=.36U L=.18U
MP2 4 8 6 2 P1 W=.36U L=.24U
C2 2 0 .653fF
C3 3 0 .454fF
C4 4 0 .74FF
C5 5 0 .086fF
C6 6 0 .45fF
C7 7 0 .38fF
C8 8 0 .248fF

.MODEL N1 NMOS LD=0.24974U VTO=0.94 PHI=0.6 UCRIT=115298 XJ=0.25U NEFF=1 RSH= 27.36 CGBO= 4.96808E-10
+CJSW= 3.9772E-10 TOX =421.00001E-10 KP= 5.504E-5 UO= 628.787 DELTA= 1.041739E-5 LAMBDA =1.67204E-2
+NSS =1El0 CGDO= 3.283127E-10 CJ= 4.1066E-4 MJSW= 0.334688 NSUB= 2.296064E16 GAMMA =0.9961 UEXP= 0.22018
+VMAX= 83151.5 NFS= 2.509221E12 TPG=1 CGSO= 3.28322E-10 MJ= 0.467277 PB =0.8
.MODEL P1 PMOS LD= 0.25000U VTO= 0.96 PHI= 0.6 UCRIT= 21136.5 XJ= 0.25U NEFF= 1.001 RSH= 70.00 CGBO= 4.75120E-10
+CJSW= 1.9981E-10 TOX =421.00001E-10 KP= 2.296E-5 UO= 262.000 DELTA =.721685 LAMBDA= 5.597E-2 NSS= 1El0
+CGDO= 3.286622E-10 CJ =12.0692E-4 MJSW= 0.177313 NSUB =5.917000E15 GAMMA =0.5057 UEXP= 0.22505 VMAX= 41563.6
+NFS= 8.0389Ell TPG=1 CGSO= 3.28322E-10 MJ= 0.431872 PB= 0.7
.TEMP 27
.TRAN .1N 5N
.PROBE
.END