[Ryps]

You are required to create an application that will allow the user to set the boundaries of a series of multiplications. (start , end, and the multiplication factor). The application should list the series in the listbox using the following format illustrated in the screenshot.
E.g, If the boundaries are as follows:
Start of loop: 1
End of Loop: 5
Multiply by: 2
The listbox should display the results as follows:
1 times 2 = 2
2 times 2 = 4
3 times 2 = 6
4 times 2 = 8
5 times 2 = 10
Use the interface attached as a guide line

Ensure that:
• Your application has the necessary input validation/exception handling mechanisms
• Redundant code is minimised (methods are created when necessary)
• Your user interface should allow the user to clear all the textboxes using the “Reset” button
• Provide a control that will allow the user to exit the application


can you please help...what i have done so far , i have attached it..what i don't know is how to assign different methods to the buttons...

[Dogstopper]

Ryps, you have posted duplicate topics (maybe by accident).

Your other one is here

[JackOfAllTrades]

I removed the duplicate topic, and you haven't "attached" anything.

Post your code in the topic, IN CODE TAGS.

This post has been edited by JackOfAllTrades: 25 August 2010 - 04:04 AM