[insanepenguin]

Hi guys,

I've used an open source Arduino 'sketch' to intercept a data feed from a wireless weather station. I can then read this information via a COM port (temperature, humidity, windspeed, rain etc). My problem is the barometric pressure reading is on the indoor console; this device can be connected to a computer also using a COM port, would I be able to read this information or would it be a series of unreadable machine code?



Thanks

[modi123_1]

You should be able to read it.

[insanepenguin]

I hope so, adds another element to the University project

[modi123_1]

Good ol' function creep!