[The Neoracle]

Ok, these have got to fit in a 1U case. . .

I'd like to know a good mobo for a:

Celron 1.3
P4 2 ghz
AMD XP1800
And AMD Duron 1.3 or 1.2

DDR on the P4 And XP, SD on the others.

If you could give an El Cheapo and a Good option for each, that would rock.

If they sell it at NewEgg.com you can just link there if that's easier.

Angled ram slots are always a plus.
On board graphics are good, lan is ok, Hardware RAID and SCSI for the P4 And AMD are good too.


Also, anyone that buys/uses 1U's, If the OS is preinstalled would you want a CD-Rom?

[supersloth]

http://usa.asus.com/...-e/overview.htm board i have. and i have the 1800 chip too. bought it at newegg no less. heheh.

[KinKyGoOsE]

Im running a P4 2.4 on an Asus P4S533.
Great OCer. GOt mine @ Googlegear.com for 108... think theyre down to 106.
It runs on the SiS645DX chipset. IMHO VIA takes it in the poopchute.

[Thorian]

Do you need multiple processors on that slim line server

http://www.aopen.com...ard/sx34-1u.htm

I used 1 of theese on a server i built However on the Dual Proc systems I just used compaq dl360's they are like $1800 with out the drives I cant build them for that cheap

[Thorian]

Oh and neo correct me if i am wrong but theese are 1U servers right.
ATX motherboards will not fit 1U is like 2 inches high

[The Neoracle]

carlcampbelljr, on Oct 11 2002, 03:24 PM, said:

Oh and neo correct me if i am wrong but theese are 1U servers right.
ATX motherboards will not fit 1U is like 2 inches high

Most 1U cases will take an ATX and smaller mobo.

[The Neoracle]

carlcampbelljr, on Oct 11 2002, 03:22 PM, said:

Do you need multiple processors on that slim line server

http://www.aopen.com...ard/sx34-1u.htm

I used 1 of theese on a server i built However on the Dual Proc systems I just used compaq dl360's they are like $1800 with out the drives I cant build them for that cheap

Uh, You can't? How could you not? I could sell you a Dual P4 w/drives for less than that.

[Thorian]

Cause accounting wants a 3 yr warrenty

[Thorian]

The Neoracle, on Oct 11 2002, 02:35 PM, said:

carlcampbelljr, on Oct 11 2002, 03:22 PM, said:

Do you need multiple processors on that slim line server

http://www.aopen.com...ard/sx34-1u.htm

I used 1 of theese on a server i built However on the Dual Proc systems I just used compaq dl360's they are like $1800 with out the drives I cant build them for that cheap

Uh, You can't? How could you not? I could sell you a Dual P4 w/drives for less than that.

With SCSI Drives or IDE? the dl360's are scsi

[The Neoracle]

carlcampbelljr, on Oct 11 2002, 10:51 PM, said:

The Neoracle, on Oct 11 2002, 02:35 PM, said:

carlcampbelljr, on Oct 11 2002, 03:22 PM, said:

Do you need multiple processors on that slim line server

http://www.aopen.com...ard/sx34-1u.htm

I used 1 of theese on a server i built However on the Dual Proc systems I just used compaq dl360's they are like $1800 with out the drives I cant build them for that cheap

Uh, You can't? How could you not? I could sell you a Dual P4 w/drives for less than that.

With SCSI Drives or IDE? the dl360's are scsi

I just bought 2 36 gb IBM SCSI 160 15krpm's for $236 the other day. So, with scsi's or 8mb buffer 80 gigers I could beat that.

[edit]$236 total, not each. [/edit]

[iamcenz]

for the AMD XP1800 i would go with the A-Bit KD7A but if you want a cheap board you could go with the ECS Mainboard K7S5A